diff --git a/common/spl/spl.c b/common/spl/spl.c
index b959aa0..eda84d0 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -34,7 +34,7 @@
 u32 *boot_params_ptr = NULL;
 
 /* See spl.h for information about this */
-binman_sym_declare(ulong, u_boot_any, offset);
+binman_sym_declare(ulong, u_boot_any, image_pos);
 
 /* Define board data structure */
 static bd_t bdata __attribute__ ((section(".data")));
@@ -129,7 +129,7 @@
 
 void spl_set_header_raw_uboot(struct spl_image_info *spl_image)
 {
-	ulong u_boot_pos = binman_sym(ulong, u_boot_any, offset);
+	ulong u_boot_pos = binman_sym(ulong, u_boot_any, image_pos);
 
 	spl_image->size = CONFIG_SYS_MONITOR_LEN;
 
diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c
index 6000f49..e594bea 100644
--- a/common/spl/spl_ram.c
+++ b/common/spl/spl_ram.c
@@ -49,7 +49,7 @@
 		load.read = spl_ram_load_read;
 		spl_load_simple_fit(spl_image, &load, 0, header);
 	} else {
-		ulong u_boot_pos = binman_sym(ulong, u_boot_any, offset);
+		ulong u_boot_pos = binman_sym(ulong, u_boot_any, image_pos);
 
 		debug("Legacy image\n");
 		/*
diff --git a/include/spl.h b/include/spl.h
index 8c55230..7fad62c 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -60,7 +60,7 @@
  * image is found. For * example if u-boot.img is used we don't check that
  * spl_parse_image_header() can parse a valid header.
  */
-binman_sym_extern(ulong, u_boot_any, offset);
+binman_sym_extern(ulong, u_boot_any, image_pos);
 
 /**
  * spl_load_simple_fit() - Loads a fit image from a device.
diff --git a/tools/binman/README b/tools/binman/README
index 4b13776..df88819 100644
--- a/tools/binman/README
+++ b/tools/binman/README
@@ -324,6 +324,12 @@
 	property is present, binman will give an error if another entry does
 	not set the offset (with the GetOffsets() method).
 
+image-pos:
+	This cannot be set on entry (or at least it is ignored if it is), but
+	with the -u option, binman will set it to the absolute image position
+	for each entry. This makes it easy to find out exactly where the entry
+	ended up in the image, regardless of parent sections, etc.
+
 
 The attributes supported for images are described below. Several are similar
 to those for entries.
@@ -550,8 +556,8 @@
    # u_boot_dtsi_options_debug = $(u_boot_dtsi_options_raw)
 
 
-Access to binman entry offsets at run time
-------------------------------------------
+Access to binman entry offsets at run time (symbols)
+----------------------------------------------------
 
 Binman assembles images and determines where each entry is placed in the image.
 This information may be useful to U-Boot at run time. For example, in SPL it
@@ -577,6 +583,18 @@
 to fill in such symbols in U-Boot proper, as well.
 
 
+Access to binman entry offsets at run time (fdt)
+------------------------------------------------
+
+Binman can update the U-Boot FDT to include the final position and size of
+each entry in the images it processes. The option to enable this is -u and it
+causes binman to make sure that the 'offset', 'image-pos' and 'size' properties
+are set correctly for every entry. Since it is not necessary to specify these in
+the image definition, binman calculates the final values and writes these to
+the device tree. These can be used by U-Boot at run-time to find the location
+of each entry.
+
+
 Map files
 ---------
 
diff --git a/tools/binman/bsection.py b/tools/binman/bsection.py
index 1604b99..08c6f0c 100644
--- a/tools/binman/bsection.py
+++ b/tools/binman/bsection.py
@@ -96,7 +96,7 @@
 
     def AddMissingProperties(self):
         """Add new properties to the device tree as needed for this entry"""
-        for prop in ['offset', 'size']:
+        for prop in ['offset', 'size', 'image-pos']:
             if not prop in self._node.props:
                 self._node.AddZeroProp(prop)
         for entry in self._entries.values():
@@ -105,6 +105,7 @@
     def SetCalculatedProperties(self):
         self._node.SetInt('offset', self._offset)
         self._node.SetInt('size', self._size)
+        self._node.SetInt('image-pos', self._image_pos)
         for entry in self._entries.values():
             entry.SetCalculatedProperties()
 
@@ -260,6 +261,11 @@
             offset = entry.offset + entry.size
             prev_name = entry.GetPath()
 
+    def SetImagePos(self, image_pos):
+        self._image_pos = image_pos
+        for entry in self._entries.values():
+            entry.SetImagePos(image_pos)
+
     def ProcessEntryContents(self):
         """Call the ProcessContents() method for each entry
 
@@ -341,6 +347,8 @@
             raise ValueError(err)
         if prop_name == 'offset':
             return entry.offset
+        elif prop_name == 'image_pos':
+            return entry.image_pos
         else:
             raise ValueError("%s: No such property '%s'" % (msg, prop_name))
 
diff --git a/tools/binman/control.py b/tools/binman/control.py
index 17c6d7a..9ac392b 100644
--- a/tools/binman/control.py
+++ b/tools/binman/control.py
@@ -161,6 +161,7 @@
                 image.PackEntries()
                 image.CheckSize()
                 image.CheckEntries()
+                image.SetImagePos()
                 if options.update_fdt:
                     image.SetCalculatedProperties()
                 image.ProcessEntryContents()
diff --git a/tools/binman/entry.py b/tools/binman/entry.py
index cb693c9..8004918 100644
--- a/tools/binman/entry.py
+++ b/tools/binman/entry.py
@@ -64,6 +64,7 @@
         self.pad_before = 0
         self.pad_after = 0
         self.offset_unset = False
+        self.image_pos = None
         if read_node:
             self.ReadNode()
 
@@ -133,7 +134,7 @@
 
     def AddMissingProperties(self):
         """Add new properties to the device tree as needed for this entry"""
-        for prop in ['offset', 'size']:
+        for prop in ['offset', 'size', 'image-pos']:
             if not prop in self._node.props:
                 self._node.AddZeroProp(prop)
 
@@ -141,6 +142,7 @@
         """Set the value of device-tree properties calculated by binman"""
         self._node.SetInt('offset', self.offset)
         self._node.SetInt('size', self.size)
+        self._node.SetInt('image-pos', self.image_pos)
 
     def ProcessFdt(self, fdt):
         return True
@@ -265,6 +267,14 @@
         self.offset = pos
         self.size = size
 
+    def SetImagePos(self, image_pos):
+        """Set the position in the image
+
+        Args:
+            image_pos: Position of this entry in the image
+        """
+        self.image_pos = image_pos + self.offset
+
     def ProcessContents(self):
         pass
 
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 1d27301..b90b80e 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -46,6 +46,10 @@
         self.size = self._section.GetSize()
         return super(Entry_section, self).Pack(offset)
 
+    def SetImagePos(self, image_pos):
+        Entry.SetImagePos(self, image_pos)
+        self._section.SetImagePos(image_pos + self.offset)
+
     def WriteSymbols(self, section):
         """Write symbol values into binary files for access at run time"""
         self._section.WriteSymbols()
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 94e48f3..94a50aa 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -1051,23 +1051,30 @@
         """Test that we can update the device tree with offset/size info"""
         _, _, _, out_dtb_fname = self._DoReadFileDtb('60_fdt_update.dts',
                                                      update_dtb=True)
-        props = self._GetPropTree(out_dtb_fname, ['offset', 'size'])
+        props = self._GetPropTree(out_dtb_fname, ['offset', 'size',
+                                                  'image-pos'])
         with open('/tmp/x.dtb', 'wb') as outf:
             with open(out_dtb_fname) as inf:
                 outf.write(inf.read())
         self.assertEqual({
+            'image-pos': 0,
             'offset': 0,
             '_testing:offset': 32,
             '_testing:size': 1,
+            '_testing:image-pos': 32,
             'section@0/u-boot:offset': 0,
             'section@0/u-boot:size': len(U_BOOT_DATA),
+            'section@0/u-boot:image-pos': 0,
             'section@0:offset': 0,
             'section@0:size': 16,
+            'section@0:image-pos': 0,
 
             'section@1/u-boot:offset': 0,
             'section@1/u-boot:size': len(U_BOOT_DATA),
+            'section@1/u-boot:image-pos': 16,
             'section@1:offset': 16,
             'section@1:size': 16,
+            'section@1:image-pos': 16,
             'size': 40
         }, props)
 
diff --git a/tools/binman/image.py b/tools/binman/image.py
index ed8261a..4debc73 100644
--- a/tools/binman/image.py
+++ b/tools/binman/image.py
@@ -96,6 +96,9 @@
     def SetCalculatedProperties(self):
         self._section.SetCalculatedProperties()
 
+    def SetImagePos(self):
+        self._section.SetImagePos(0)
+
     def ProcessEntryContents(self):
         """Call the ProcessContents() method for each entry
 
diff --git a/tools/binman/test/u_boot_binman_syms b/tools/binman/test/u_boot_binman_syms
index f2dcb88..126a1a6 100755
--- a/tools/binman/test/u_boot_binman_syms
+++ b/tools/binman/test/u_boot_binman_syms
Binary files differ
diff --git a/tools/binman/test/u_boot_binman_syms.c b/tools/binman/test/u_boot_binman_syms.c
index cbb2f3f..4898f98 100644
--- a/tools/binman/test/u_boot_binman_syms.c
+++ b/tools/binman/test/u_boot_binman_syms.c
@@ -10,4 +10,4 @@
 
 binman_sym_declare(unsigned long, u_boot_spl, offset);
 binman_sym_declare(unsigned long long, u_boot_spl2, offset);
-binman_sym_declare(unsigned long, u_boot_any, offset);
+binman_sym_declare(unsigned long, u_boot_any, image_pos);